Lizard Island Depth From 24 Feb 2012 To 22 Aug 2019

Temporal Range: From 24-Feb-2012 To 22-Aug-2019

Resource Summary

The 'Wireless Sensor Networks Facility' (formerly known as Facility for The Automated Intelligent Monitoring of Marine Systems (FAIMMS)), part of the Great Barrier Reef Ocean Observing System project (GBROOS), is a facility of the Australian 'Integrated Marine Observing System' (IMOS) project. This data set was collected by the Great Barrier Reef Wireless Sensor Network.

Constraints
Cite this Record
Copy
Australian Institute of Marine Science (AIMS). (2020), Lizard Island Depth From 24 Feb 2012 To 22 Aug 2019, https://doi.org/10.25845/5c09bf93f315d, accessed 29-Feb-2020.
Charts
Deployment History
Download all data

Charts
Interactive plot and downloads
Parent Record
Lizard Island Automated Marine Weather and Oceanographic Station
Additional Information
DOI10.25845/5c09bf93f315d
Update FrequencyAs Needed
Collection StatusOn Going
Sampling FrequencyHourly
Point of Contact
Bainbridge, Scott, Mr
Australian Institute of Marine Science (AIMS)
Source CatalogueIMOS - Weather Stations
Credits
  • Australian Institute of Marine Science (AIMS)
  • Integrated Marine Observing System (IMOS). IMOS is a national collaborative research infrastructure, supported by the Australian Government.
  • Wireless Sensor Networks Facility part of the Great Barrier Reef Ocean Observing System project (GBROOS) (IMOS)
  • Queensland Department of State Development
  • Tropical Marine Network (TMN)
Parameters
  • Depth of observation or sample collection
  • Pressure (measured variable) in the water body exerted by overlying sea water only
Lineage

All sensors are factory calibrated and then calibrated and serviced every six months.
The clocks on all instruments are set each night at mid-night from a central server which is turn has its clock set off an NTP server. Typical time drift in a day is a few seconds.
The clocks on all instruments are set each night at mid-night from a central server which is turn has its clock set off an NTP server. The location of all fixed equipment is recorded using a standard GPS so the accuracy should be within 5-10m using WGS-84. All mobile equipment has an on-board GPS and so should have equivalent accuracy although is will be around 10-20m due to the nature of the movement of the buoys.

Instruments are replaced and serviced at regular intervals. Each change results in a new deployment. Multiple deployments have been merged and a single data 'channel' has been created for each sensor to make it easier to access and use the data. There is a single metadata record for each channel with the deployment details for the sensor that makes up the channel described in the metadata record. Data are quality controlled by validating against a set of rules (bounds checking, etc) and then flagged using the IODE set of flags.